Friday, 8 June 2012

Samsung NP300E5A, NP300E7A Laptop Screen Replacement

The Samsung NP300E5A laptop come with 15.6 inch TFT LED widescreen with aspect ratio of 16:9 and resolution of 1600 x 900 while the NP300E7A is 17.3 when measured diagonally. In this write-up you will learn how to replace a broken screen on the Samsung NP300E5A, NP300E7A laptops.

Samsung  NP300E5A  Laptop with cracked screen

Samsung NP300E5A Replacement Screen
Samsung NP300E7A Replacement Screen
Samsung NP300E5A-A01DX Screen
Samsung NP300E5A-A02DX Screen
Samsung NP300E5A-A03DX Screen
Samsung NP300E5A-A04DX Screen
Samsung NP300E5A-A03HU Screen
Samsung NP300E7A-A04UK Screen

Have you dropped the laptop and it is cracked? or it is simply flickering. The instruction here will assist in dismantling and removing the defective screen and replacing it with a new one.

Samsung NP300E5A Remove Battery

First of all, Remove the laptop battery before starting the screen repair.

On the four corners of the screen are screw covers. Remove them to expose the screws holding the bezel.

Remove the screws and keep them aside.

Using the image on the left as a guide put your fingers between the screen and the plastic bezel and start pulling on all sides.

Pull on all sides until the bezel starts releasing from its catches. This pull must be done firmly but with care to avoid snapping the plastic.

Now that the internal part is exposed pull the screen slightly towards you and remove all side screws from the brackets.

At the back of the screen panel you will find part numbers like LTN156AT18LTN156AT19 made by Samsung or N156BGE-L52N156BGE-L62 made by Chi Mei Innolux

Remove the screen cable connection. Usually it is held down by a clear table or a catch. Raise the clear tape or catch upwards before doing the diconnection. Use the image on the right as a guide.

At this point the screen removal process is done. To install a new screen simply continue the process in reverse.

No comments:

Post a Comment