Monday, 28 May 2012

Dell Inspiron M5030, M5010, N5030, N5010, 15R, Q15R, N7010 Laptop Screen Replacement


In this tutorial you will learn how to disassemble and replace a broken or cracked LCD screen on Dell Inspiron M5030, M5010, N5030, N5010, 15R, Q15R, N7010 Laptop Notebooks. The Dell Inspiron M5030, M5010, N5030, N5010, 15R, Q15R, N7010 Laptop come with 15.6 inch HD WLED display monitor panel.

Broken Dell M5030 Screen

Before starting the screen replacement make sure you have the right screen to install. Choose from the below links;

Dell Inspiron 15R Laptop Screen
Dell Inspiron Q15R Laptop Screen
Dell Inspiron N5110 Laptop Screen
Dell Inspiron N5030 Laptop Screen
Dell Inspiron M5010 Laptop screen
Dell Inspiron M5030 Laptop Screen
Dell Inspiron N7010 Laptop Screen

You can find others replacement screens at Laptop Screen Online.



Always Remove Laptop Battery




Always make sure the laptop battery is removed before starting the screen repair.











The Dell Inspiron M5030, M5010, N5030, N5010, 15R, Q15R, N7010 Laptop mostly will not come with any screws in the bezel. All that is needed to remove the bezel is to put your finger between the screen and the plastic bezel and pull carefully until it released. Do this on all sides of the laptop.










The bezel of the Dell Inspiron M5030, M5010, N5030, N5010, 15R, Q15R, N7010 notebook are very fragile and pulling too hard may snap it.








By successfully removing the bezel you the internal part of the screen is now accessible. At the top two sides of the screen remove the screws holding it to the back cover and keep them safely.











On the two bottom sides there will be 2 or 3 screws. Unscrew them to free the screen arms totally from the back cover.












At this point the screen can now be lowered to reveal the screen cables and LED connection. This area must be handled with care.











On the two sides of the screen remove all the screws holding the screen to the hinges arms and keep them safely.










Place the screen face-down and disconnect the Led cable. Note that sometimes this connection is held down by a clear tape. Raise and peel the clear tape with a flat screwdriver before disconnecting the cable.







The screen removal process is now complete. To install a new screen simply carry out the whole process backward (in reverse order).



No comments:

Post a Comment